Welcome to Myedrawings.com - industrial CAD files and equipment
iul. 28, 2026 / De MyeDrawings / în Workshop & Equipment
SLLU uses a U-shaped low-profile platform so a hand pallet jack can drive into the opening, set the pallet on the arms of the U, and withdraw — no ramp and no pit. Marco describes the same idea for Euro pallets and crates; EdmoLift groups U- and E-shaped low-profile decks specifically for pallet handling with a hand pallet truck.
| Model | Capacity | Stroke | H MIN |
|---|---|---|---|
| SLLU-1000 | 1000 kg | 800 mm | 80 mm |
| SLLU-1500 | 1500 kg | 800 mm | 85 mm |
| SLLU-2000 | 2000 kg | 800 mm | 100 mm |
Drawing: first-angle projection (ISO). Dimensions nominal.
Loading method is the product
The U cut-out is not decoration. It defines which pallets fit, which jack widths clear the opening, and whether operators can complete a cycle without side transfer. Marco’s U-shaped low-profile models keep closed heights around 80–100 mm while sizing the pocket for pallet truck entry. If your site mixes closed-bottom skids or non-Euro footprints, confirm geometry before you assume SLLU will behave like a solid SLL with a ramp.
| Model | Capacity | Stroke | H MIN |
|---|---|---|---|
| SLLU-1000 | 1000 kg | 800 mm | 80 mm |
| SLLU-1500 | 1500 kg | 800 mm | 85 mm |
| SLLU-2000 | 2000 kg | 800 mm | 100 mm |
Drawing: first-angle projection (ISO). Dimensions nominal.
Why skip the ramp
A solid low-profile table needs approach space for a ramp. A U-shaped table trades that floor area for a front opening. UK and EU product notes repeatedly sell the benefit as cleaner installation: drive in, lower the forks, lift. That is ideal for packing cells and pallet levelling where aisle space is scarce and cycle time matters.
| Model | Capacity | Stroke | H MIN |
|---|---|---|---|
| SLLU-1000 | 1000 kg | 800 mm | 80 mm |
| SLLU-1500 | 1500 kg | 800 mm | 85 mm |
| SLLU-2000 | 2000 kg | 800 mm | 100 mm |
Drawing: first-angle projection (ISO). Dimensions nominal.
Ergonomics in use
Once the pallet sits on the U arms, the table raises so the working layer stays near elbow height as the stack grows or shrinks. That is the classic pallet-positioner workflow European low-profile makers promote for manual loading and unloading. Stroke is typically workstation-scale (hundreds of millimetres), not mezzanine-scale. Do not brief SLLU as a high-lift substitute for SLV2/SLV3.
| Model | Capacity | Stroke | H MIN |
|---|---|---|---|
| SLLU-1000 | 1000 kg | 800 mm | 80 mm |
| SLLU-1500 | 1500 kg | 800 mm | 85 mm |
| SLLU-2000 | 2000 kg | 800 mm | 100 mm |
Drawing: first-angle projection (ISO). Dimensions nominal.
U vs E vs solid low-profile
U-shape: drive-in from the open end for open-bottom pallets. E-shape (where offered): extra support fingers for heavier or less stable pallet bases. Solid SLL: any wheeled load via ramp, including closed bases that cannot sit on U arms. Choose SLLU when the dominant cycle is pallet jack in / pallet jack out on compatible pallets. Choose SLL/SLLW when loads vary or need a continuous deck.
| Model | Capacity | Stroke | H MIN |
|---|---|---|---|
| SLLU-1000 | 1000 kg | 800 mm | 80 mm |
| SLLU-1500 | 1500 kg | 800 mm | 85 mm |
| SLLU-2000 | 2000 kg | 800 mm | 100 mm |
Drawing: first-angle projection (ISO). Dimensions nominal.
Specification traps
Write down pallet type (Euro 800×1200 vs others), jack overall width, fork length, and whether the pallet bottom boards leave clearance for withdrawal. State capacity with the load centred on the U arms — not with mass hanging beyond the unsupported opening. Confirm EN 1570-1 safeguarding around the open throat, because the missing deck material changes pinch and shear exposure compared with a solid platform.
| Model | Capacity | Stroke | H MIN |
|---|---|---|---|
| SLLU-1000 | 1000 kg | 800 mm | 80 mm |
| SLLU-1500 | 1500 kg | 800 mm | 85 mm |
| SLLU-2000 | 2000 kg | 800 mm | 100 mm |
Drawing: first-angle projection (ISO). Dimensions nominal.
Brief checklist for an SLLU drawing
1) Pallet standard and bottom-board layout
2) Pallet jack width vs U opening, plus approach aisle
3) Required H MIN / working stroke for ergonomic layers
4) Rated load on the supported arms, including uneven stacks
5) Guarding concept for the open front and EN 1570-1 use case
With those answers fixed, SLLU becomes a fast, pit-free pallet exchanger — not a compromised solid table with a hole cut afterwards.
| Model | Capacity | Stroke | H MIN |
|---|---|---|---|
| SLLU-1000 | 1000 kg | 800 mm | 80 mm |
| SLLU-1500 | 1500 kg | 800 mm | 85 mm |
| SLLU-2000 | 2000 kg | 800 mm | 100 mm |
Drawing: first-angle projection (ISO). Dimensions nominal.